Powersoft M28Q

9.149,00 RON
Suna pentru stoc
Descriere
Detalii Tehnice
Video
Comentarii

Detalii Produs

Specificatii pentru Powersoft M28Q:


Number of channels
4
       
Output power
4 Ω
8 Ω
100V
70V
8 Ω bridged
     EIAJ test standard, 1 kHz, 1% THD
4 x 700 W
4 x 360 W
n/a
n/a
1,400 W per channel pair
Max. output voltage
85 V(peak)
Max. output current
60 A(peak)


AC MAINS POWER
         
Power supply
Universal, regulated switch mode
Operating voltage
100 V - 240 V (factory selection) ± 10%, 50 Hz - 60 Hz
Consumption / current draw
 
@ 230 V
@ 115 V
    Idle
62 W
0.51 A
0.6 A
    1/8 of max. output power @ 4 Ω*
580 W
3.74 A
7.48 A
    1/4 of max. output power @ 4 Ω*
1,066 W
6.52 A
13.04 A


THERMAL
         
Environmental operating temperature
0-45° C / 32-113° F 
Thermal dissipation
Fan, continuously variable speed, temperature controlled, front to rear airflow
    Idle
53 kcal/hr
212 BTU/hr
 
    1/8 of max. output power @ 4 Ω*
198 kcal/hr
785 BTU/hr
 
    1/4 of max. output power @ 4 Ω*
315 kcal/hr
1,249 BTU/hr
 


AUDIO
         
Gain
32dB, 30dB, 28dB, 26dB, 24dB, 22dB, 20dB, 18dB, 14dB, 4dB, -∞, user selectable
Input sensitivity @ 8 Ω
1.34 V / 4.76 dBu
     
Max input level
6 V / 17.8 dBu
     
Input impedance
10 kΩ
     
Frequency response
10 Hz - 30 kHz (1 W @ 8 Ω, ± 3 dB)
THD+N / SMPTE IMD
< 0.05% @ 1/2 of full power
DIM100 IMD
typ. <0.005% (<0.02% @ >0.1 W)
S/N ratio
>111 dBA (20 Hz - 20 kHz, A weighted)
Crosstalk separation
>70 dB @ 1 kHz
Slew rate
40 V/µs @ 8 Ω, input filter bypassed
Damping factor @ 8 Ω
>5000 @ 100 Hz


FRONT PANEL
Indicators
3 LEDs per channel: 2 x green, 1 x red 
3 status LEDs: 1 x green, 1x white, 1 x yellow
Controls
1 stepped level attenuator pot per channel
Mains switch
Maintenance
Dust filters foam behind front panel


REAR PANEL
Audio signal input connectors
4 x balanced Neutrik® XLR female
Loudspeakers output connectors
4 x Neutrik® Speakon NL4MD
AC mains
IEC C13 16A connector; AC mains cord with 3-pin plug 15A for US, IEC Schuko 16 A for every other nation
Controls
2 x link switch, linking analog inputs 1 & 2 and 2 & 4


CONSTRUCTION
Dimensions
W 483 mm / 19", H 44.5 mm / 1U, D 358 mm / 14.1"
Weight
7.3 kg / 16 lbs
Chassis
1 mm (0.04”) steel chassis and steel removable dust cover, 3 mm (0.12”) steel front panel, screw hole preotection, steel side reinforcement & rear support


M28Q DSP+ETH
ADDITIONAL SPECIFICATIONS
   
Output power
4 Ω
8 Ω
100V
70V
8 Ω bridged
    EIAJ test standard, 1 kHz, 1% THD
2 x 700 W
2 x 360 W
n/a
n/a
1,400 W per channel pair
   
REAR PANEL
 
Network data port Ethernet
1 x RJ45 with activity LED with 2 rotary address switches
DSP preset selection
2 x Pushbutton (stepping through bank of 4 presets) 
2 x 4 LED preset indicators


DSP
A/D converter
Dual 24bit 24/48 kHz Tandem® architecture, dynamic range 118 dB(A) mono, 100 dB(A) stereo, THD <0.02% (20 Hz - 20 kHz)
D/A converter
Dual 24bit 24/48 kHz Tandem® architecture, 115 dB(A) dynamic range, THD <0.02% (20 Hz - 20 kHz)
Presets
Bank of 4 presets, management and upload via  Armonía Pro Audio Suite™
Delay for time alignment
<10 ms per output
Crossover filters
Butterworth, Linkwitz-Riley, Bessel, 6dB/oct to 48dB/oct
Output equalizer
Up to 9 fully parametric per channel: peaking, hi/lo shelving, hi/lo pass, band pass, band stop, all pass
Input equalizer
5 types (PEQ, shelving, band pass, band stop, all pass)
Limiters
Peak limiter, RMS limiter, frequency dependent RMS limiter
 

Newsletter
Aboneaza-te la newsletter pentru
utlimele oferte si noutati!
Producatori