Powersoft Digram K3

13.670,00 RON
Suna pentru stoc
Descriere
Detalii Tehnice
Video
Comentarii

Detalii Produs

Specificatii pentru�Powersoft Digram K3:


Number of channels 2
Output power 2 Ω
4 Ω
8 Ω
4 Ω Bridged 8�Ω�Bridged
���� EIAJ test, 1 kHz, 1% THD 2 x 2,800 W 2 x 2,600 W 2 x 1,400 1 x 5,600 W 1 x 5,200 W
Max. output voltage 165 V(peak)
Max. output current 102 A(peak)



AC MAINS POWER
Power supply Universal, regulated switch mode with PFC (Power Factor Correction)
Operating voltage 100-240 V �10%, 50/60 Hz
Power factor cos (φ) >0.95 @ >500 W
Consumption / current draw @ 230 V @ 115 V
��� Idle 112 W 0.57 A 1.14 A
��� 1/8 of max. output power @ 4 Ω* 813 W 4.0 A 8.0 A
��� 1/4 of max. output power @ 4 Ω* 1,625 W 7.4 A 14.8 A



THERMAL
Environmental operating temperature 0-45� C / 32-113� F
Thermal dissipation Fan, continuously variable speed, temperature controlled, front to rear airflow
��� Idle 96 kcal/hr 382 BTU/hr
��� 1/8 of max. output power @ 4 Ω* 211 kcal/hr 836 BTU/hr
��� 1/4 of max. output power @ 4 Ω* 326 kcal/hr 1,390 BTU/hr



AUDIO
Gain (selectable via user menu) 26 dB 29 dB 32 dB 35 dB
Input sensitivity @ 8 Ω 5.30 V 3.75 V 2.66 V 1.88 V
Max input level 27 dBu 24 dBu 21 dBu 18 dBu
Gate -52 dBu -55 dBu -58 dBu -61 dBu
Input impedance 10 kΩ balanced
Frequency response 20 Hz - 20 kHz (1 W @ 8 Ω, �0.5 dB)
THD+N / SMPTE IMD / DIM100 IMD <0.3% from 1 W to full power (typically <0.05%)
S/N ratio >106 dBA (20 Hz - 20 kHz, A weighted)
Crosstalk separation >70 dB @ 1 kHz
Slew rate 50 V/�s @ 8 Ω. input filter bypassed
Damping factor >5000 @ 20 - 200 Hz



FRONT PANEL
Indicators 7 meter LEDs: 5 x green, 1 x yellow, 1 x red, top yellow and red show alarm with protect description on LCD panel
Controls 4 pushbuttons, function depending on user menu
Maintenance SmartCard reader/writer for firmware updates and preset storage.�
Easily accessible dust filter foam behind two steel covers



REAR PANEL
Audio signal input connectors Analog: 2 x balanced Neutrik� XLR female; AES3: use channel 2 XLR
Audio signal output connectors Analog: 2 x balanced Neutrik� XLR male
Loudspeaker output connectors 2 x Neutrik� Speakon NL4MD
Network data port RS485 1 x RJ45 with 2 recessed rotary encoders for ID selection
Aux voltage 1 x 2-pin Phoenix P. 3.81mm
AC mains IEC20A with IEC20A Schuko for EU, IEC20A/American 15A pin plug
Controls 1 x link switch, linking analog inputs 1 and 2�
AES3/analog input switch



CONSTRUCTION
Dimensions W 483 mm / 19", H 44.5 mm / 1U, D 380 mm / 15"
Weight 8kg / 17.7 lbs
Chassis 1 mm / 0.04” steel chassis and removable dust cover�
3 mm / 0.12” steel front panel, screw hole protection, side reinforcement & rear support



DSP SPECIFICATIONS (optional)
A/D converter Dual 24bit 96 kHz Tandem� architecture with 127 dBA of dynamic range and THD <0.005% (20 Hz - 20 kHz)
D/A converter Dual 24bit 96 kHz Tandem� architecture with 122 dBA of dynamic range and THD <0.003% (20 Hz - 20 kHz)
Memory 8 MB (RAM) plus 2 MB (flash for presets)
Presets 50 stored locally + 150 stored on a smartcard
Digital audio input AES3 (glitchless fallback to analog audio selectable)
Delay for time alignment Up to 4 s on the input section, up to 32 ms per output, sample-by-sample stepping
Crossover filters Butterworth, Linkwitz-Riley, Bessel, Arbitrary Asymmetric, 6dB/oct to 48dB/oct (IIR), linear phase (FIR), hybrid (FIR+IIR)
Output equalizer 16 fully parametric filters per channel, IIR: peaking, hi/lo shelving, hi/lo pass eq, band pass, band stop, all pass. Custom FIR up to 384 taps @ 48 or 96 kHz
Input equalizer Three layers (PEQ, raised cosine, shelving), 32 filters each + group filters, up to 256 filters per channel
Cable compensation network Up to 2 Ω negative/positive wire compensation (Active DampingControl™)
Limiter Power limiter (TruePower™, RMS voltage, RMS current) + Peak Limiter

Newsletter
Aboneaza-te la newsletter pentru
utlimele oferte si noutati!
Producatori